223 Imr 4895 55 Grain

H4895 isn't as course as the imr variety, so it works better in. 223. 25. 0 grains with a 55 grain bullet, 24. 0 grains with a 69 grain bullet and 23. 0 grains with a 77 grain bullet. I use 24. 5 grains of h4895 with cci sr primers and either hornady 55 gr fmj or 55 gr vmax with excellent results. I haven't had the powder bridging issue others have. Here's my test loads that i'm starting with:

I chose h4895 since it is so versatile and allows for 60% reduced loads. The starting load is 25. 0gr with these bullets, and 26. 0gr. Imr4895 will work with the 55's, but does better with the heavier pills. It is the wrong combination of burning rate and bulk density for efficient use with low bullet weight. In fact, it has been one of the better propellants i've tried when i've wanted to see.

With a 62 or 69 grain bullet, 25. 0 grains is. The one powder i do have, that is shown in most. 223 data, is imr4895. Is this a pretty decent 'starter' powder for plinking loads with 52/55 gr bullets? Im hoping for nice low recoil load on both the 223 for 3 gun. Had better accuracy with 24. 3 or 24. 5 depending on brass and primer. Using lc brass what's some of the pet loads out there for. 223 with h4895 or imr 4895 powder and using 55 grn. For. 223 and 55 fmj bullet, 26 grains of imr 4895 with an overall length no more than 2. 260 will work every time. About 3100 fps or a little less with your short barrel.